PART NUMBER /// VWR15G503

VWR Uprated Lower Engine Mount 
A5 platform

To harness your power increases, and transfer that power to the road or track where you need it, RacingLine’s VWR Uprated Lower Engine Mount will give a much more solid drive, and crucially give additional durability to your car.  

The VWR Uprated Lower Engine Mount is a CNC-machined, fully engineered replacement unit to replace the soft, standard rubber mount.  This all but eradicates fore/aft engine and transmission movement, ensuring clean transfer of power to the road. The difference is noticeable the first time you pull away after fitment and on every gearchange after that (whether manual or DSG).

The risk of wheel-hop under hard acceleration is greatly reduced as the whole engine and 'box assembly is prevented from juddering when wheelspin occurs and during aggressive gearchanges.

VWR UPRATED LOWER ENGINE MOUNT

KEY TECH SPECS

ADDED STRENGTH

Essential upgrade for modified cars to keep the drivetrain properly located.

TRANSFORM THE DRIVE

Transform the feeling of your car, through eliminating wheel-hop off the line and through aggressive gearchanges.

HIGH QUALITY

CNC machined in the UK, highest quality materials and construction, including a full replacement lower mount (not an insert).

EXTENSIVE DEVELOPMENT

Careful development of our unique dual-durometer (stiffness) ratings of the polymer used, meaning less compromise on NVH

RACE PROVEN

Developed and proven on race cars – refined for road

UPGRADEABLE

The upper mounts can be added at any time to supplement this Lower Engine mount with the two upper mounts to provide the full upgrade kit.

VWR UPRATED LOWER ENGINE MOUNT

showcase

PERFORMANCE /// DEVELOPMENT

performance


///
  For those in the know, the Uprated Lower Engine Mount is truly one of the most worthwhile upgrades for anyone who appreciates the driving dynamics of their car.

///  The Uprated Lower Engine Mount stiffens the whole location of the drivetrain greatly to give a much tighter, sharper feeling to your car. It removes the loose feeling when coming on and off-throttle, and an increased chance of wheel-hop under hard acceleration as the whole engine and 'box assembly judders.

///  This adds strength to the drivetrain, helping to protect from future wear and breakages. Rather than some aftermarket 'push in' bushes which crudely fill the voids in the original factory mounts, the VWR unit is a completely redesigned replacement mount assembly and torque link.

///  Of course, a bit more noise from the drivetrain comes into the cabin, but because of our unique 'dual durometer' design, most keen drivers love the sense that they are more 'connected' to their car.

///  For most road cars, we’d recommend fitting the Lower Subframe Mount on its own, leaving the two upper mounts standard. The Uprated Upper Engine Mounts can be fitted at any point in the future as a further upgrade.

DEVELOPMENT


///  We developed the Uprated Engine Mounts after experiencing on-track failures from almost every aftermarket brand of 'uprated' mounts.

///  After much development, we came up with our unique 'Dual Durometer' design - using two different polymers of different durometer (hardness) ratings which allows some movement within the mount, and filters much of the drivetrain's vibration.

///  The Lower Subframe Mount mount incorporates a cutout to provide clearance on 4Motion cars around the anti-roll bar.  This cutout also allows fitment of an uprated anti-roll bar (standard or aftermarket) with proper clearance.

///  The mount starts life as a billet of T6000 Ali which is fully CNC machined into the finished piece before our unique 'dual durometer' polymer mixes are moulded in to to give the strength, stiffness and durability that we require.

 ///   All our mounts are designed, engineered and manufactured in the UK.

DEVELOPMENT NOTE


///  Suitable for manual and DSG gearbox cars. 

///  Not recommended for TDI Road cars as cabin vibration becomes quite significant.  However, these are perfectly suited to TDI motorsport cars.  

/// Make no mistake, uprated engine mounts are a relatively extreme modification to make to your car. Naturally, a bit more noise from the drivetrain comes into the cabin, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.  Allow a few hundred miles/kms of driving for the mount to settle in after installation.

VWR UPRATED LOWER ENGINE MOUNT

COMPATIBILITY
2.0 TSI/TFSI models only

VWR UPRATED LOWER ENGINE MOUNT

Golf 5 all models

Golf 6 all models

Scirocco all models

Audi A3 8P all models

Audi S3 8P all models

SEAT Leon 1P

Audi A3 all 2003+

Audi S3 all 2003+

Skoda Octavia 1P

Jetta A5 all models

Eos, Touran, Golf Plus

Tiguan all models

FIND A LOCAL RACINGLINE PERFORMANCE RETAILER