PART NUMBER /// VWR43G500 /// VWR43G700

VWR Solid Adjustable Top Mounts

If you are serious about high performance driving with some track use thrown in, the VWR Solid Adjustable Top Mounts really give a night-and-day difference to wheel control and geometry, and make a great upgrade to your VWR coilover suspension kit.

The front camber angle on VWG cars is fixed as standard.  For track and high-performance use, additional negative camber is highly desirable.  The VWR Solid Adjustable Top Mounts allow this geometry to be altered to transform front-end grip.

Additionally, by replacing the entire, soft rubber factory top mount with a precisely engineered, near-solid replacement, the precision of your wheel control is transformed as strut top movement is all but eliminated.  Rather than the 'squidge' under load from the original rubber mounts, you will feel instant, precise responses with much improved feedback, yet maintaining surprisingly good refinement.

Please note, as this is a race derived part, to ensure easy access to the adjusters bodywork modification may be required and also requires VWR Linear Race Spring upgrade.

VWR SOLID ADJUSTABLE TOP MOUNTS

showcase

PERFORMANCE /// DEVELOPMENT

performance


///
  VWR Solid Adjustable Top Mounts give you the facility to add negative camber (bringing the tops of the wheels inboard).

///  This gives a night-and-day difference on track by keeping the wheels upright during hard cornering, avoiding excessive wear and overheat on the outside edge of tyres on-track.

///  Fitment assists clearance of the tyre inside the wheel arch. Adding in negative camber ‘tucks’ the tops of the wheels inboard.

///
 Eliminate strut top movement while still allowing smooth rotational movement and surprisingly good refinement through the ‘PillowBall’ top bearing.

///  Transform the feeling of directness and connection to the car, eradicating the slack and ‘rubberiness’ that is the case in production cars.

DEVELOPMENT


///  Relatively simple fitment.  Unlike many Top Mounts available on the market, these plates are a direct swap that require no cutting and are completely reversible back to standard.

///  Fully compatible with VWR StreetSport Coilover kits – which uniquely can run with either Solid Adjustable Top Mounts or the standard rubber mounts.

///  Extensively proven on our Volkswagen Racing Cup cars, providing the full range of camber adjustment along with great strength in extreme race conditions.

VWR SOLID ADJUSTABLE TOP MOUNTS

COMPATIBILITY

Golf 7 GTI

Golf 7 R

GOLF 7 all models

GOLF 6 all models

Golf 5 all models

Scirocco all models

Audi A3 all 2003+

Audi S3 all 2003+

SEAT Leon all 2005+

Jetta all 2005+

Beetle all 2005+

Audi TT all 2014+

Tiguan all models

Eos, Touran, Golf Plus

Skoda Octavia 2005+

FIND A LOCAL RACINGLINE PERFORMANCE RETAILER